18663200076
项目ItemsSPECIFICATIONSC6150中心高Center height250mm床身上工件直径Max.Swing over bed500mm刀架上工件直径Max.Swing over toolpost295mm马鞍槽工件直径Max.S
| 项目Items | SPECIFICATIONS | C6150 |
| 中心高 | Center height | 250mm |
| 床身上工件直径 | Max.Swing over bed | 500mm |
| 刀架上工件直径 | Max.Swing over toolpost | 295mm |
| 马鞍槽工件直径 | Max.Swing in gap | 700mm |
| 马鞍槽有效长度 | Effective gap length | 200mm |
| 工件长度 | Max.Length of workpiece | 750mm / 1000mm/1500mm/2000mm |
| 床身宽度 | Width of bed | 360mm |
| 主轴孔锥度 | Spindle taper | 莫氏6号MT6 |
| 主轴通孔直径 | Thru-hole of spindle | 52mm |
| 转速范围 | Range of spindle speeds | 30-1600r/min(12steps) |
| 横刀架行程 | Cross toolpost travel | 240mm |
| 小刀架行程 | Compound toolpost travel | 140mm |
| 尾座行程 | Tail stock center travel | 90mm |
| 尾座套筒锥度 | Tail stock sleeve taper | MT4 |
| 电机功率 | Spindle motor | 3/4KW |
| 公制螺纹 | Range of metric threads(kinds) | 0.45-20mm(30种) |
| 英制螺纹 | Range of inch threads(kinds) | 80-1.75n/1" |
| 纵向进给量 | Longitudinal feed per spindle rev. | 0.039-1.1mm |
| 横向进给量 | Cross feed per spindle rev. | 0.018-0.55mm |
| 外形尺寸 | Overall dimensions for 750mm | 2000×1130×1540 |
| Overall dimensions for 1000mm | 2250×1130×1540 | |
| 净重 | Net weight of 750mm | 1700kg |
| Net weight of 1000mm | 1800kg |